Replacement Windows

EcoShield Windows

PDF Version

Measuring Instructions

For EcoShield Replacement Windows

Measure Height from these two points
  1. EcoShield double hung replacement windows are manufactured on the odd eighth inch on the width and the quarter inch on the height

    Example: WIDTHS
    27-1/8", 27-3/8", 27-5/8", 27-7/8"
    Example: HEIGHTS
    50-1/4", 50-1/2", 50-3/4", 51"

    Width: EcoShield will deduct at least 1/4" from the opening size so the master frame will be manufactured tipto- tip 1/4" to 3/8" under the opening measurement.
    Height: EcoShield will deduct at least 1/2" from opening size so the master frame will be manufactured tip-to-tip 1/2" to 5/8" under the opening size measurement, except for the 2000 Single Hung, Rolling & Picture Window, and the 7000 Casement & Awning will be the same cut backs as the width, as there is no head expander.
  2. EcoShield horizontals rollers will be cut on the 1/4" on the width and height. Deductions for tip-to-tip size same as double hung above.

    Example Rolling Widths:
    40-1/4", 40-1/2", 40-3/4", 41"

    Note: The tip-to-tip manufacturing size will be 1/4" to 3/8" under the opening size
  3. Mesure widths from these two points WIDTH: Measure between jambs at three points: top, middle and bottom. Use the smallest measurement.
  4. HEIGHT: Measure between the outside sill, at the stool, and the top of the window casing on the left and right sides. Use the smallest measurement.
  5. Overall width of window unit is 3 1/4"

Home    Replacement Windows    New Construction Windows    Patio Doors     R5 Windows    FAQs    Site Map


EcoShield Window Systems, a quality product of Kasson and Keller Inc.
Manufacturing replacement windows, new construction windows, and storm windows since 1947

Product information on this site is subject to change without notice.
Please contact your dealer or customer service representative for the most up to date information.